HS Scrap shear/baler 800 tons

GPS HS 800 shear baler and logger HS 800 SCRAP SHEAR / BALER / CAR LOGGER Call for a quote now GPS HS 800 cutting capacity HS 800 SCRAP SHEAR / BALER / CAR LOGGER Call today for a quote GPS HS 800 baling HS 800 SCRAP SHEAR / BALER / CAR LOGGER Call today for a quote GPS HS 800 shearing capacity HS 800 SCRAP SHEAR / BALER / CAR LOGGER Call today for a quote

HS Series
Heavy duty 800 ton scrap shear/baler

Powerful and heavy duty scrap shear/baler and logger

Versatile stationary scrap shear/baler and logger on a self-supporting frame.

Processed materials:

Shear:
HMS1 – HMS2 – Plate and structural – Beams – Pipes – Foundry scrap

Bale:
Metal scrap – White goods – Cuttings

Log:
Cars – Sheet iron

Productivity*:

Shearing: up to 30 tons per hour
Baling: up to 24 tons per hour
Logging: up to 25 tons per hour

*based on configuration

Main Technical Specifications

Shear Force: 800 tons
Hold-down: 165 tons
Baling Force: 
190 tons
Lid Force: 275 tons | 395 tons
Bale size: 800 x 600 x Var. (31.5" x  24" x Var)
Folding Box Length: 6 m (19.7 ft) or 7 m (23 ft)
Rams per lid: 2 | 3 each lid

Features & Benefits

Diesel engines or electric motors.
Self-sufficient (D) vs. lowest running/maintenance cost (E).

Remote control.
Reduce operator cost by running the baler directly from the feeding crane.

Preloading table.
Increase productivity of the shear.

Designed to work in rough environments

These heavy scrap shear/baler and loggers are the true masters of the scrap yard as they have been specifically designed for high volume scrap processing.

These multidimensional machines are able to shear, log and bale high quantities of material day in – day out and are therefore designed to keep up with your productivity requirements. They will guarantee all the flexibility you may need in your scrap yard. They are made of a very robust and heavy construction, this is most noteworthy because these scrap shears boast all the finest and top of the line components, all aimed at keeping your cost per ton processing cost as low as possible.

The HS 800 shears are high productivity scrap processing machines.

These machines have been designed to treat a wide variety of materials including car shells, mixed light scrap, HMS1, HMS2, sheet metal, tin, white goods, foundry scrap, plate and structural, pipes and beams.

Besides shearing, these shears will produce logs with an average density between 400/500 kg/cubic meter (25 to 35 lbs/cubic foot). This is, for example, the typical density of a car log. It can also produce bales with a higher density ranging between 1250 and 1450 kg/cubic meter (80 to 90 lbs/cubic foot).

The machine features a box of 6 meter (19.7 ft) with a force of 275 tons per lid or a 7 meter (23 ft) box with a staggering force of 395 tons per lid!

Average productivity:

Shearing: up to 30 tons per hour
Baling: up to 24 tons per hour
Logging: up to 25 tons per hour.

The machines rigorously mount Bosch / Rexroth components. The structure is equipped with a lid and a mobile side. The tank-shaped compaction box offers the possibility of loading a large quantity of scrap. All the plates in contact with scrap are lined with abrasion resistant Hardox 450 wear plates.

The speed and method of feeding, regularity of feed material dimension in addition to in-feed material type and density, the length as well as other external factors can influence the performance of the equipment. After the installation, it’s recommendable to check the real on-site productivity. Due to previously mentioned factors productivity and results can vary considerably from installation to installation.