Stationary M-Generation shear/baler/logger

GPS M7-815 shear/baler in production M-GENERATION SCRAP SHEAR / BALER / CAR LOGGER Call for a quote now GPS M7-815 shearing scrap M-GENERATION SCRAP SHEAR / BALER / CAR LOGGER Call today for a quote GPS M7-815 power-unit and cabin M-GENERATION SCRAP SHEAR / BALER / CAR LOGGER Call today for a quote GPS M6-715 scrap shear M-GENERATION SCRAP SHEAR / BALER / CAR LOGGER Call today for a quote

Stationary shear/baler/logger
715 | 815 | 1050 tons

Experience and innovation

Versatile stationary shear/baler/logger on a self-supporting frame.

Processed materials:

HMS1 – HMS2 – Plate and structural – Beams – Pipes – Foundry scrap

Metal scrap – White goods – Cuttings

Cars – Sheet iron


Shearing: up to 30 tons per hour
Baling: up to 24 tons per hour
Logging: up to 28 tons per hour

*based on configuration

Main Technical Specifications

Shear Force: 715 tons | 815 tons | 1050 tons
Hold-down: 120 tons | 150 tons
Baling Force: 
160 tons
Lid Force: 220 tons | 275 tons
Bale size: 880 x 650 x Var. (34" x  25" x Var)
Folding Box Length: 6 m (19.7 ft) or 7.5 m (24.7 ft)
Rams per lid: 3 | 4 each lid

Features & Benefits

Diesel engines or electric motors.
Self-sufficient (D) vs. lowest running/maintenance cost (E).

Remote control.
Reduce operator cost by running the baler directly from the feeding crane.

Preloading table.
Increase productivity of the shear.

Versatile productivity and a competitive cost.

The M-Generation shear/baler/logger feature several different options and configurations in order to guarantee the maximum possible flexibility.

The charging box features on the 815 and 1050 ton shears four! powerful rams per lid generating a staggering 275 tons of force on the lid and on the side compression lid. This is way more power than any other shear in this segment.

Versatile, modern and hybrid shear/baler/logger for scrap processing.

The M-Generation is a very flexible range of shear/balers/loggers.

These machines have been designed to treat a wide variety of materials including car shells, mixed light scrap, HMS1, HMS2, sheet metal, tin, white goods, foundry scrap, plate and structural, pipes and beams.

Besides shearing, these shears will produce logs with an average density between 400/500 kg/cubic meter (25 to 35 lbs/cubic foot). This is, for example, the typical density of a car log. It can also produce bales with a higher density ranging between 1250 and 1450 kg/cubic meter (80 to 90 lbs/cubic foot).

M-Generation shear/baler/logger range includes three models with different shear forces, box length and installed power to meet the most varied production needs.

Average productivity:

Shearing tons/hr
up to 25
up to 27
up to 30
Baling tons/hr
up to 20
up to 22
up to 24
Logging tons/hr
up to 24
up to 26
up to 28

The machines rigorously mount Bosch / Rexroth components. The structure is equipped with a lid and a mobile side. The tank-shaped compaction box offers the possibility of loading a large quantity of scrap. All the plates in contact with scrap are lined with abrasion resistant Hardox 450 wear plates.

The various options include among others the hydraulic legs for lifting and loading on a trailer  and the Data Pack.

The speed and method of feeding, regularity of feed material dimension in addition to in-feed material type and density, the length as well as other external factors can influence the performance of the equipment. After the installation, it’s recommendable to check the real on-site productivity. Due to previously mentioned factors productivity and results can vary considerably from installation to installation.